R236
Number of forward gears
6
6
Gear positions
R-0-1-2-3-4-5-6
R-0-1-2-3-4-5-6
Recommended max engine torque
1000 Nm
1000 Nm
Weight
Approximately 41 Kg depending on specification
Approximately 41 Kg depending on specification
1-6 gear
23 mm forged and ground high quality steel, many ratios available
23 mm forged and ground high quality steel, many ratios available
The R236 is specifically designed for high engine torque rear wheel drive drifting, circuit and endurance racing, typically 600 to 1000 Nm, can be used with or without paddle shift and oil cooling options.
| Number of forward gears | 6 |
| Gear positions | R-0-1-2-3-4-5-6 |
| Recommended max engine torque | 1000 Nm |
| Weight | Approximately 41 Kg depending on specification |
| 1-6 gear | 23 mm forged and ground high quality steel, many ratios available |
| Applications: | Drifting, race circuit, endurance |
| Length: | Gearbox front face to output flange 485 mm |
| Drop gears: | 30 mm forged and ground high quality steel, currently 9 options available, fitted in rear of gearbox allowing for quick change without removing the gearbox, gears can be reversed |
| Clutch rings (dog rings): | Tractive high torque 98 mm forged and ground high quality steel, same for all gears |
| Oil capacity: | 2.0 Liters |
| Lubrication: | Wet sump with GL5 specification oil, recommend Tractive SAE 90 gear oil available in 1 or 4 litre containers |
| Oil pump: | Mechanical oil pump available, externally mounted, internal oil spray to all gears |
| Housing design: | Modular concept allowing easy configuration changes |
| Extra support: | Central bearing support for input and main shafts |
| Housing materials: | High grade billet and extruded aircraft spec alloys anodised in black |
| Clutch release: | Tractive clutch cylinder available to fit directly to our various front plate designs |
| Reverse gear: | Dog ring engagement protected by secondary reverse release lever (protection can be removed for paddle shift) |
| Cockpit gear lever: | Two lengths of return sprung lever available |
| Lever and gearbox connection: | Through 8 mm stainless steel rods & a bell crank making a 90-degree connection |
| Paddle shift: | Brackets and levers available for direct fitting of KMP & Geartronics actuators |
| Bearings: | SKF high quality roller bearings for input and main shafts, INA cage bearings for gears |
| Gear position: | Single or twin output contactless potentiometer fitted with SureSeal connector |
The R236 is specifically designed for high engine torque rear wheel drive drifting, circuit and endurance racing, typically 600 to 1000 Nm, can be used with or without paddle shift and oil cooling options.
View our product list here
R236 Documents
